Fixed: Netgear Router Not Working Issue

5 Benefits of Wireless Internet!

Netgear router is one of the best routers available in the market. Its low cost, easy-to-use, and advanced security features make it one of the most favorable one among the users. Despite being the best networking gadget, it’s also prone to technical issues. And users sometimes get stuck with different kinds of issues while using the Netgear router. The Netgear router not working issue is one of the common issues reported by hundreds of users. If you are also the one getting similar kinds of issues, then need no to worry. Here we have outlined some basic troubleshooting solutions to resolve the Netgear router not working issue. Just have a quick glance at the below section, you might find it useful.

Possible Solutions

Perform a Reboot

Rebooting your Netgear router is the first troubleshooting technique you should implement prior to applying any troubleshooting technique. It’s a simple and very effective technique to troubleshoot minor bugs that might be restricting you to access services through the Netgear router. Also, it will boost the performance of your Netgear router and prevent it from getting overheated. So, without wasting any more time, reboot your Netgear router by going through the below-mentioned steps.

  • Remove all the devices connected to your Netgear router.
  • Disconnect it from the power source and turn it off.
  • Now, set it aside for a while before connecting back to the power socket and powering it on.

Now, check if the issue you were facing has been resolved by accessing the Netgear router using default IP i.e. or default web address. If not, then apply the next troubleshooting method.

Verify Your Ethernet Connection

Check that the Ethernet cable you are using to establish a connection between your devices doesn’t have any wear or tear. If you find any damage to the Ethernet cable, then consider replacing it with the new one. Now, check if the issue you were facing has been fixed. If not, then try connecting your networking devices using a wireless connection.

Avoid WiFi Interference

You are required to be very cautious while selecting the location of your Netgear router. The placement of your Netgear router should be away from the objects such as refrigerators, microwaves, cordless phones, baby monitors, and other smart home appliances. As these kinds of objects use radio frequencies that might create disturbance in the WiFi signals resulting in the Netgear router not working issue.

Reset your Netgear Router

Resetting your device to the default factory settings and configuring it again by accessing is the final resort you should implement if all your efforts went in vain to fix the Netgear router not working issue. However, it’s not a tough job,still many netizens get stuck with an issue while doing so. If you are also the one getting hard times in performing the default factory reset, then here we have outlined steps by steps information to do it with ease. Just have a glance at the below section, you might find it useful.

  • You are required to find the Reset button on your router.
  • Once you have identified the Reset button, press it.
  • Then, your router will reboot itself and be restored to default factory settings.

Now, configure it again from the scratch by accessing the default web address i.e., and have access to high-speed internet.

Things to do to Avoid Issue

Update Netgear Router Firmware

Confirm that the firmware version of your Netgear router is not outdated. If that’s not the case, then it’s recommended you update Netgear router firmware as soon as possible. By upgrading your Netgear router firmware to the most recent version, not only you will remove the bugs but it will boost the performance of your device as well.

In this way, you will be able to resolve the Netgear router not working issue without any trouble. If you think you know any other easy way to resolve this issue and then feel free to share with us in the comment section. Your suggestion will be valuable for us.

How to Reset Netgear Router Using Two Different Methods?

Is your Netgear WiFi router troubling you? Are you fed up with the end number of issues that it’s been inflicting upon you? If the answer to both these questions is a big yes, then know that you’ve got nothing to worry about. Regardless of what issue you’re Netgear router is causing, it can easily be resolved if you perform factory default reset.

In this article, we’ve mentioned two different methods through which you can restore your Netgear WiFi device to its factory default settings. They are as follows:

Once you’re done going through this article, you are free to use any method to reset your Netgear WiFi router. So, read on.

Steps to Reset Netgear Router by Accessing

This method involves logging in to the Netgear WiFi router. Walk through the instructions mentioned below to restore your device to its factory default settings by accessing the page:

  • Turn on your home router after plugging it into a wall socket.

  • Once the power LED light turns green, connect the router to the modem wirelessly.

  • You can also connect your devices with the help of an Ethernet cable.

  • Then, open an updated web browser on your PC.

  • Type in the address bar of the web browser and hit Enter.

  • Refer to the user manual and fill in the default username and password.

  • Click on the Log In button to access the setup wizard.

  • Go to Settings > Administration or Advanced > Administration.

  • Select Erase > Restore to factory default settings.

  • Give your device some time to get restored to its default mode.

By following these instructions, you’ll be able to restore your Netgear router to its factory default settings by accessing

In case you are facing issues while trying to log into your device, then that’s probably because of a weak internet connection. Thus, ensure that your device is connected to a blazing-fast internet connection. In case the internet issue still doesn’t get resolved, then get in touch with your ISP.

Steps to Reset Netgear Router by Pressing the Reset Button

If accessing to reset the router seemed like a lengthy method to you, then you can give this one a try. Walk through the below-mentioned steps to restore your device to factory default mode by pressing the Reset button:

  • Make sure that your Netgear WiFi router is well-connected to the modem.

  • Locate the Reset button located on your Netgear WiFi router.

  • Once found, take an oil pin, toothpick, paper clip, or any other sharp object.

  • Insert the pin-like object in the hold and press the Reset button.

  • Hold the button for some time before releasing it.

In this way, you’ll be able to restore your device to the factory default settings by pressing the Reset button. Once you are done resetting your WiFi device, check whether the issues your router was inflicting have been fixed or not.

Note: Follow the aforementioned guidelines in the exact order as they are written. Otherwise, you won’t be able to reset your Netgear router and will be stuck with technical issues till God knows when!

Wrapping Up

This was all about the two different methods used to restore your Netgear WiFi router to its factory default mode. We hope that this post helped you in troubleshooting whatever issue you were facing with your WiFi device. In case we did, then don’t hesitate to leave a word of appreciation in the comments section below. We’ll be glad to hear about what you have to say.